Preset Position - Panasonic AW-HE130KP Operating Instructions Manual

Web screen configurations (continued)
Audio [Audio]
„
Configure audio settings.
<NOTE>
• Images and audio are not synchronized. Therefore, images and audio
may be slightly out of sync.
• The audio may skip depending on the network environment.
Audio
Set the communication mode used to transmit audio data between
the unit and the personal computer.
Setting value:
Off Do not transmit audio data between the unit and the personal
computer. All settings and controls related to audio will be
disabled.
On The personal computer receives audio data from the unit. This
allows images to be viewed on the personal computer with
audio. Images and audio are not synchronized.
Factory settings: Off
Audio encoding format
Select the audio compression format.
Currently, only AAC-HQ (High quality) can be selected.
Factory settings: AAC-HQ (High quality)
Audio bit rate
Set the bit rate for transmitting audio.
Setting value: 64kbps / 96kbps / 128kbps
Factory settings: 128kbps
Mic input volume
Set the volume of the audio from the unit when listening to it on the
personal computer.
Setting value:
Mic High Set the volume to high. Use this when audio is input to
the camera via a microphone.
Mic Middle Set the volume to medium. Use this when audio is input
to the camera via a microphone.
Mic Low Set the volume to low. Use this when audio is input to
the camera via a microphone.
Line High Set the volume to high. Use this when audio is input to
the camera via line input.
Line Middle Set the volume to medium. Use this when audio is
input to the camera via line input.
Line Low Set the volume to low. Use this when audio is input to
the camera via line input.
Factory settings: Line Middle
Mic input interval
Currently, this setting is disabled.
Plugin Power
Turn plug-in power on/off.
Off Set plug-in power to on.
On Set plug-in power to off.
<NOTE>
• This is only enabled when [Mic input volume] is set to [Mic High],
[Mic Middle], and [Mic Low].
76
Image adjust / preset position screen
„
[Image/Position]
Display the image quality adjustment / preset position screen.
Image adjust
When you click the [Setup] button, the image adjust screen [Image
adjust] appears. (→ page 77)

Preset position

When you click the [Setup] button, the preset position screen [Preset
position] appears. (→ page 81)