Color Correction - Panasonic AW-HE130KP Operating Instructions Manual

Web screen configurations (continued)
Matrix Type
Select the type of color matrix.
Setting value:
Normal Load preset color matrix data, and perform saturation and
hue adjustment.
EBU
NTSC
User Adjust the [Linear Matrix] and [Color Correction] values.
Factory settings: Normal
Linear Matrix
This can be set when [User] has been selected as the [Matrix Type]
setting.
Setting value:
R-G Adjust the color to between –63 to +63 for each axis
direction.
R-B
G-R
G-B
B-R
B-G

Color Correction

This can be set when [User] has been selected as the [Matrix Type]
setting.
Adjust the saturation and hue.
Saturation
Adjust the saturation for each color.
Setting range: -63 to +63
Phase
Adjust the hue for each color.
Setting range: -63 to +63
B_Mg Color between blue and magenta
Mg Magenta
Mg_R Color between magenta and red
Mg_R_R Color with a 1:3 magenta to red ratio
R Red
R_R_YI Color with a 3:1 red to yellow ratio
R_Yl Color between red and yellow
R_Yl_Yl Color with a 1:3 red to yellow ratio
Yl Yellow
Yl_G Color between yellow and green
G Green
G_Cy Color between green and cyan
Cy Cyan
Cy_B Color between cyan and blue
B Blue
z Preset position screen [Preset position]
Perform operations and adjustments related to preset positions.
To display the Preset position screen, click the [Setup] button for [Preset
position] in the image adjust / preset position screen [Image/Position].
The settings in this screen (with the exception of [Preset]) are applied
immediately.
Preset
This selects the preset position to be operated from the pull-down menu.
This is used to register the current status in the preset
position now selected on the pull-down menu.
It does not function if [Home] has been selected on the
(Set)
pull-down menu.
The camera direction moves to the preset position which is
now selected on the pull-down menu.
The settings that are reproduced at this position are the
settings which were established on the [Preset Scope]
menu (→ page 56, page 82, page 84).
The camera direction moves to the home position if [Home]
(Move)
has been selected on the pull-down menu.
In such cases, the image output during movement to the
home position will not freeze, regardless of the [Freeze
During Preset] setting.
This is used to delete the preset position setting which is
currently being selected.
It does not function if [Home] has been selected on the
(Delete)
pull-down menu.
81