Employee Charge Key - Sharp UP-3301 Instruction Manual

■ Employee charge key

Procedure
Select the employee charge key.
▼
The screen continues.
136
Program each item as follows:
• TEXT(GROSS) (Use the character entry)
Description for the charge (gross) key. Up to 8 characters
can be entered.
• TEXT(REFUND) (Use the character entry)
Description for the charge (refund) key. Up to 8 characters
can be entered.
• HALO (High Amount Lockout: use the numeric entry)
AB is the same as A x 10
A: Significant digit (1 thru 9)
B: Number of zeros to follow the significant digit (0 thru 8)
You can set AB at 18 for no limitation.
• SHORT TENDER (Use the selective entry)
DISABLE: Disables short amount tender.
ENABLE: Enables short amount tender.
• HEADER ON BILL (Use the selective entry)
YES: Enables header printing on the bill.
NO: Disables header printing on the bill.
• FOOTER ON BILL (Use the selective entry)
YES: Enables footer printing on the bill.
NO: Disables footer printing on the bill.
• CAT OPERATION (Use the selective entry)
CAT3 COMPULSORY: Compulsory CAT3
CAT2 COMPULSORY: Compulsory CAT2
CAT1 COMPULSORY: Compulsory CAT1
NON-COMPULSORY: Non-compulsory CAT3/CAT2/CAT1
• CAT1 ACTION CODE (Use the selective entry)
Select the CAT1 ACTION CODE from the following items:
• DEBIT
• DIAL
• NOT TRANSMIT
• CAT2 ACTION CODE (Use the selective entry)
Select the CAT2 ACTION CODE from the following items:
• AUTH-ONLY
• DIAL
• POST-AUTH
• CAT2 TYPE (Use the selective entry)
Select the CAT2 type from the following items:
• CHECK
• DEBIT
• CREDIT
B
.