Disassembly/Reassembly Procedures: Radio Disassembly
8.7.3
Removal of the Expansion Board Assembly (C)
1. Using the Black Stick, unplug the two flex connectors located on the left and right side of the
Expansion Board Assembly (36). Unfold and straighten the flex located on the right side as
shown in
Flex Connectors
Figure 8-16. Remove Flex Connectors and Expansion Board Assembly
2. Remove the Expansion Board Assembly (C) by gently lifting up the right side of the PCB as
shown in
If the VOCON Board Assembly (G) is to be removed from the Control Top Assembly (J), then
remove the Connector Plug (27) with the Black Stick and unplug the Control Top Assembly
flex as shown in
If the radio is equipped with an Option Board Assembly in lieu of the Connector Plug (27):
i. rotate the Option Board locking levers to unlock the option board and free it for removal
ii. unplug the Option Board Assembly from the VOCON Board Assembly by using the
Figure 8-16.
Figure 8-16.
Figure 8-16.
as shown in
Figure 8-17.
Figure 8-17. Unlock Levers
Black Stick as shown in
Figure 8-18. Remove Option Board
Connector Plug (27)
Locking Levers
Figure 8-18.
Option Board
Expansion Board Assembly (36)
Sec 2: 8-13