Answer Reception Mode - Sanyo SFX-33 Instruction Manual

Answer reception mode
Use this mode if you want to receive both phone messages and faxes while you are away.
(Connect an answering machine to the SFX-33 through the line plug.)
When a call arrives:
1. The SFX-33 (and other telephones connected on the same line) ring according to the
ring delay setting of your answering machine.
2. Your answering machine answers the call with your announcement.
When an incoming fax signal is received:
The SFX-33 automatically switches to the fax receiving mode after the announcement
playback,
When a phone call (or a manual fax call) is received:
Your answering machine plays your announcement and then goes into recording mode.
(Callers can now leave a message.)
Advise your callers in your announcement that a fax can be received as soon as the
announcement playback starts.
Example: If you are sending a fax, you can start transmission now. Or please leave a
voice message after the tone following this message.
If the call is for a manual fax transmission and no voice is heard for 6 seconds, the SFX-
33 automatically switches over to the fax receiving mode and sends a fax tone to the
caller.
3.
4.
Fax reception starts.
** RECEIVING **
Reception is completed.
I
!
123 Ott.'95 12:001
The answering machine must be set to answer a call within 4 rings.
Automatic switching may not function properly on certain answering systems.
When the SFX-33 is set to the ANSWER mode, there may be some difficulties in remote
message retrieval operation of the connected answering machine. [f you need to access
the answering machine by remote, the SFX-33 must be set to the MANUAL mode.
29