Automatic Reception Mode - Sanyo sfx-32 Instruction Manual

29
Auto reception mode
— ——
When an automatically transmitted fax is received:
Incoming faxes that are automatically transmitted are received automatically after 2 to 3 rings.
When a voice call or manually transmitted fax .is received:
A voice call or manual fax transmission is automatically connected to the line after 2 to 3 rings and the built-in voice
response answers the caller. (The voice response can be turned off. See note 1 below.)
Here's what happens when a voice call or manual fax transmission is received:
Incoming call.
The built-in telephone
As soon as the line is
and connected extension phone both ring 2 to 3 times.
connected (see note 2), the voice response 1 is heard.
lYQ!zEww
."Please wait for a moment".
After this voice response, the SFX-32 can receive a fax. If the caller does not start fax transmission or the
telephone is not picked up, the SFX-32 continues to ring 7 more times. Voice response 2 is heard. (See note 2.)
L!QEzKWti
"No one is here now, however if you wish to send a fax, please transmit at the tone."
The SFX-32 automatically switches to the fax receiving mode, and fax reception starts.
1
Notes
** RECEIVING *
1 Using the feature switch No. 16, you can switch the voice response on or off. (See page 82.) If this switch is
set to 00, no voice response will be heard.
IMPORTANT Once connected to the line, the caller is billed for the call.
2 The number of simulated rings that sound after the line is connected and the first voice response is heard
can be changed to no rings (position 00) or any odd number between 3 – 11 rings. Use
No. 09 (page 82.)
(If this switch is set to 00, no voice response will be heard.)
IMPORTANT Only built-in telephone rings for simulated ring. No extension phone (if
SFX-32 ring.
the feature switch
any) connected to