Memo Playing,Erasing By Remote Operation - Sanyo sfx-32 Instruction Manual

MEMO playing,erasing 51
by remote operation
2 ml 'e'eased"
Enter 4-digit ID number while OGM is
. A beep IS heard for an acceptance.
789
3'
MEMO Playing
Press [#] [2] .
SFX-32 starts to play the MEMO from number 1.
For skip playing, high speed playing and replay for
MEMO, see page 48.
MEMO Erasing
Press [#] [0] while MEMO is playing.
MEMO which is playing is erased.
A beep is heard for succeeded operation, then the next
memo is played.
To erase continuously, repeat this operation.
When All of memo playing is finished, you hear a beep
three times.
If you need other remote operation continuously, enter
the desired code within 10 seconds after the beep.
i
4
Hang up the handset when you finish the operation.
If there is no memo when you enter [#] [2], you hear a short beep 3 times and
after that 10 seconds silent is presented.
If you need to operate other remote function, press desired code within 10
seconds.
If not, the line is disconnected.
You can stop the memo playing and operate other remote function.
To do this, enter the first digit of the remote code and confirm that the memo
playing or erasing is stopped, then enter the second digit of the remote code.
If the memo playing is not stopped, enter the first digit until it is stopped.