Sanyo sfx-32 Instruction Manual page 11

10
Recording paper
—
2
W \ ,. .
' .
'A
'.
'"o -.
Open the protective cover and rear cover.
Press the ~] button to open the
recording paper cover.
Place the supplied roll, in the direction
shown in the diagram, in the paper holder
with both sides seated securely.
Remove any slack from the roll.
Insert the end of the roll into the record-
ing paper exit slot
3
Pull out the end of the roll from the record-
ing paper exit until it extends 4 inches.
Close the recording paper cover by
pressing both left and right corners of
the far end of the cover firmly.
The SFX-32 cuts the extra recording
paper automatically.
Use only the recording paper specified for the SFX-32.
The rear cover must be left open while the SFX-32 is in standby mode.
High-grade thermal paper
The SFX-32 is compatible with the high-grade thermal paper, a new type fax
recording paper with plain-paper quality. Unlike regular thermal paper, the
high-grade thermal paper does not fade with time, can be written on with
pencil and can be erased.
SANYO Type: 3RE2182800450,216 mm (8.5") wide and 25 m (82') long
A 12-meter (39') long roll is supplied with your SFX-32.
Thermal paper
SANYO Type: R-4079448-1, 216 mm (8.5") wide and 30 m (98') long.
To purchase, contact your dealer.
Anti-curl system
The SFX-32 has a built-in anti-curl system that prevents thermal recording paper
(high-grade or regular) from curling.
Correct
Wrong