Contrast/Resolution - Sanyo sfx-32 Instruction Manual

21
Contrast/Resolution
The SFX-32 allows you to select different contrast/
halftone and resolution modes for fax transmission
and copying. Select the most suitable mode for
your original documents after placing the docu-
ments in the original slot.
You can also set the SFX-32 either to remain in the
selected mode until another selection is made, or
to return to the default mode after each trans-
mission/copying. Use the feature switch No, 27 and
28 to switch between Not return and Return home
modes. (See page 83.) The initial factory setting is
Not return position.
I
CONTRAST
I
NORMAL
4
LIGHT
4
HALFTONE
I RESOLUTION I
STD
4
FINE
4
SUPER FINE
For normal contrast documents.
For low contrast documents which need to be trans-
mitted or copied darker.
For transmitting or copying halftone documents
(photographs, for example).
When HALFTONE is selected, the resolution mode is
automatically set to FINE.
For text in standard typefaces.
For text with fine type and for drawings.
For text with very small characters and/or graphics. The superfine
communication is possible only with Sanyo fax models with superfine
feature and non-Sanyo models that have ITU-T standard superfine
feature.