Documents; Diagnostic Reports - Sanyo sfx-32 Instruction Manual

36
Diagnostic reports
The codes shown below appear on the activity and transmission reports to help you diagnose any problems
quickly and accurately.
ERROR CODE
DESCRIPTION
OK:
. Transmission/reception satisfactory.
. No response from other party. Contact other party to make sure other machine is
10:
ready to receive.
Make sure the telephone line is connected to "LINE" on the rear of the SFX-32.
12:
No response (to timer transmission).
,——— ——. ,
20:
~STC)P/c, key pressed during transmission/reception.
21:
original document
jammed. Remove and replace correctly.
23:
Recording paper ran out during reception. Replace recording paper.
24:
Recording paper jams during reception. Check the recording paper.
25:
Cutter did not work during reception. Contact your dealer.
27
Timer transmission canceled or no original inserted for timer transmission.
. Printing quality poor due to poor telephone line connection. If this code appears
30:
frequently, contact an authorized Sanyo service center.
Other party's fax machine in abnormal condition (no recording paper, etc.) COntaCt
40:
the other party.
Transmission was halted by the other party or their fax machine. (Line was
50:
disconnected during transmission/reception.)
60:
Communication impossible due to poor phone line.
71:
Communication impossible due to compatibility problems. Contact other party.
Also make sure feature switch No. 26 position.