Unpacking - Sanyo sfx-32 Instruction Manual

3
Unpacking
Open the carton.
Remove the accessories (handset, recording paper roll, etc.) from the carton.
Remove the fax machine along with the foam braces on both sides.
Remove the polyethylene wrapping around the fax machine.
Remove the transportation tapes.
Save the carton and the foam braces for later storage and/or shipping.
Place the machine where there is access to an AC outlet and a modular phone jack. (Be sure to observe the
To unpack the SFX-32:
1.
2.
3.
4.
5.
6.
7.
precautions below.)
Placement precautions
Avoid placing the SFX-32 in humid or dusty places, or in
(direct sunlight, heaters, etc.).
Do not step on or set anything on the AC cord. DAMAGE
CAUSE A FIRE.
Install the unit only on a stable surface.
places where it will be exposed to excessive heat
TO THE AC CORD IS A SAFETY RISK AND CAN
Do not connect the SFX-32 to the same AC outlet as appliances that generate large amounts of interference
(heaters with thermostats, appliances with motors, etc.). It is best to use a completely separate electrical outlet.
Keep the SFX-32 away from water. If water accidentally enters the unit, unplug the AC power cord immediately.
DO NOT PLUG THE UNIT IN AGAIN. Contact an authorized Sanyo service center or dealer.
Handling precautions
Do no~ ;emove any parts that are held in place with screws. (The SFX-32 does not contain any user-serviceable
items).
Maintain standard room temperature 5°C – 35°C (41°F – 95"F) during use. Do not subject the unit to shock or
vibration. Do not move the unit while it is in use.
A rapid increase in room temperature in cool weather can cause condensation to form inside the unit. If this
happens, wait at least 15 minutes after turning the unit on before attempting to operate it.
Failure to do so may result in paper jams and/or poor print quality.
When cleaning the cover or operation panel of the unit, wipe gently using a damp cloth to which a small amount
of a neutral detergent has been added. NEVER USE SOLVENTS OR CHEMICALLY TREATED CLOTHS.