Kenwood NX-5700 User Manual page 23

GPS/ Bluetooth Reset
o
Activates GPS/ Bluetooth Reset mode.
GPS Position Display <GPS_P>
o
Allows you to display your location data.
Group <Group>
o
Activates Group Call Mode.
Group + Short Message <Grp+SD>
o
Allows you to specify a Group ID to send short messages.
Group + Status <Grp+ST>
o
Allows you to specify a Group ID to send status messages.
Group ID/ Channel Entry <GrpEnt>
o
In NXDN Trunking systems, press this key to enter a Group ID. In other operating
systems, this key functions the same as Channel Entry.
High Transmit Power <High>
o
Turns High Transmit Power on or off. When using a channel programmed with low
or medium power, this allows you to change the output power to high.
Home Channel <Home>
o
Press this key to jump to your home zone and channel (pre-programmed by your
dealer). If activated by your dealer, you can set your own Home Channel by selecting
your desired zone and channel using Home Channel Select.
Home Channel Select
o
Allows you to set the currently selected channel to Home Channel.
Horn Alert <HA>
o
Enables the Horn Alert terminal when a call is received. It activates the car headlights
and horn to alert you of the incoming call when you are away from the transceiver.
Individual <Indcal>
o
Refer to "Making Individual Calls" {p. 6} {p. 7} {p. 9} {p. 11} .
Individual + Short Message <Ind+SD>
o
Allows you to specify a Unit ID to send short messages.
Individual + Status <Ind+ST>
o
Allows you to specify a Unit ID to send status messages.
IP Address
o
Displays the IP address.
23