Useful Functions - Kenwood NX-5700 User Manual

Note:
Once the headset has been paired, it can be used automatically with the transceiver the
●
next time the transceiver and headset are powered on. If the headset cannot be used
automatically, connect manually using the My Device setting in the Bluetooth menu of the
transceiver.
(Some headset models cannot be used automatically.)
Up to 10 Bluetooth devices can be registered to your transceiver.
●
Making hands-free call
o
Press the PTT switch to activate the microphone of the Bluetooth headset.
Note:
The volume level can only be adjusted on the Bluetooth headset. The volume control of
●
the transceiver does not function. However, if the audio is set to output from the built-in
speaker of the transceiver in the Bluetooth Speaker setting, the volume level is controlled
by the transceiver.
The microphone sensitivity can be set using the External Mic Sense function.
●
.

USEFUL FUNCTIONS

There are some useful functions on your transceiver which allows you to display
information of the Bluetooth devices registered to the transceiver and to switch the
speaker audio output.
Connecting/ Disconnecting/ Deleting a registered device using My Devices
o
Press the key programmed as [Menu] to enter Bluetooth My Devices Mode using
the Menu Mode.
To connect a device:
1
Press the [ ] key or the [J] and [K] keys to select the device to connect to.
45