Kenwood NX-5700 User Manual page 9

2
Press the [J] and [K] keys to select a Group ID/ name from the list that has been
pre-entered into your transceiver.
3
Press and hold the PTT switch to make the call.
Speak into the transceiver as you would during a normal call.
●
The LCD display will return to the zone and channel screen after call ends.
●
Making Individual Calls (NXDN Conventional)
o
You can make calls to specific persons.
1
Press the key programmed as [Individual], [Individual + Short Message] or
[Individual + Status] to enter Individual Call Mode.
Alternatively, press the key programmed as [Menu] to enter Individual Call Mode using
the Menu Mode.
The ID list appears on the display.
●
2
Press the [J] and [K] keys to select a unit ID from the list that has been pre-
entered into your transceiver.
9