Sanyo SFX-11 Service Manual page 11

( ( (
Turn off the power switch.
Gently wipe the housing with a soft clean cloth dampened with a small amount
of a neutral detergent.
Do not use a cleaning agent, such as alcohol and benzene.
If a streak or dirty pattern appears on a copy or other party's received copy,
clean the document feed roller-2 with a soft clean cloth with a small amount of
neutral detergent.
-l
Open the operation panel.
~.
+2.
I
Y'
2
In order to rotate the document feed
roller-2, inserf a small piece of papar into
the portion of a sensor as shown in the
figure.
3
Cleanthedocument fwd roflar-2then
dry thoroughly to prevent the document
from jamming.
If the document jamming or overlapping frequently occurs, clean the document
feed roller-1and sheet break with a cottonswab dampened with a small amount
of a neutral detergent.
1
Open the operation panel then pull the
document release lever as shown m the
figure.
2
..—
In order to rotate the document feed
roller-1, insert a small piece of paper mto
the document sensor as shown m the
figure.
[
I
3
Clean the document feed roller-1 and
sheet break, then dry it thoroughly to
prevent the document from jamm!ng.
feed roller-l
Documentfead roller-~ bocurnanfeaneor