Epson Stylus Pro 3880 User Manual page 120

120 | Solving Problems
Message
PAPER SENSOR
ERROR
PRESS THE
+
BUTTON.
LOAD THE CORRECT
PAPER
PAPER SENSOR
ERROR
PRESS THE
+
BUTTON
LOAD DIFFERENT
PAPER
PAPER SETTING
ERROR
CHECK PAPER
SOURCE IN THE
DRIVER SETTINGS
AND LOAD PAPER
CORRECTLY
PAPER SIZE ERROR
LOAD THE CORRECT
SIZE PAPER
PAPER SKEW
PRESS THE DOWN
BUTTON.
LOAD PAPER
CORRECTLY
Explanation
The loaded paper is not the
same as the paper type
selected for the Automatic
Head Alignment.
The loaded paper does not
match the paper type
selected.
You are using the wrong
paper path for the type of
paper you're using.
The size of paper you
loaded is not correct for the
document/image you are
printing.
The paper is not loaded
straight.
Response
Press the Cancel/Reset button, and then load the
+
paper that matches the type selected for the Automatic
Head Alignment. See "Aligning the Print Head" on
page 93.
Press the + Cancel/Reset button, and then load the
paper that matches the type of paper you selected. See
"Aligning the Print Head" on page 93 for details.
Check the Paper Source setting in the printer driver, and
load the paper in the correct slot. See "Choosing the
Correct Paper Path" on page 29 and "Choosing Page
Setup and Basic Print Options" on page 48 for
Macintosh or "Choosing Paper and Layout Options" on
page 71 for Windows.
Remove the paper and load media that is the correct
size for what you are printing.
Press the d button, and then load the paper straight. If
you are using the auto sheet feeder, you can use the
top edge guide to help feed the paper straight. See
page 35 for details.
6-120