Epson Stylus Pro 3880 User Manual page 44

44 | Handling Paper and Other Media
9. Make sure the paper you are creating the configuration for is loaded in
the correct paper path in the printer. Then press r and
print a paper thickness pattern. The printer prints a pattern similar to
the following:
10. Examine the printed pattern for the most evenly overlapping lines, and
choose that pattern number. (In the example shown above, the lines of
pattern 4 are the most even.)
11. After printing the pattern,
or u to select the number that you noted in step 10. Then
press Enter to save the setting.
12. Press l and then d to select
Adjusting this setting and the
eliminate banding.
13. Press u or d to set the paper feed
amount for the printable area (labelled
in the illustration to the right), and then
press Enter. Choose a lower value if
you see white lines on your prints, or a
higher value if you see dark lines.
14. Press l and then d to select
2-44
Smallest gap
THICKNESS NUMBER
PAPER FEED ADJUST A
PAPER FEED ADJUST B
A
PAPER FEED ADJUST B
Enter to
is displayed. Press d
, then press r.
can help
, then press r.