Fujitsu PCNA EP OCe14102 Installation Manual page 12

2. Hardware Installation
Once the optical transceivers are installed, insert the optical cable into the LC
connectors on the adapter (see Figure 2-5).
Figure 2-5 Connecting a Fiber Optic Cable
When connecting a DAC cable, ensure the SFP+ cages do not have optical
transceivers installed in them. To remove optical transceivers, see step 5 on page 8.
After confirming there are no optical transceivers installed, insert the DAC
transceiver into the SFP+ cage on the adapter (see Figure 2-6).
.
Figure 2-6 Connecting a DAC Cable
2. After the appropriate cable is connected to the adapter, connect the other end of the
cable to a suitable device, such as a Top of Rack (TOR) EE switch.
After the device is connected to the adapter, you are ready to apply power to the
computer. See "Applying Power" on page 13.
PCNA EP OCe14102 2x 10Gb
Attaching Devices
Page 12