Adapter Identification - Fujitsu PCNA EP OCe14102 Installation Manual

1. Introduction

Adapter Identification

Each adapter ships with several numbers clearly marked on the board. Fujitsu
recommends recording these numbers before installation.
IEEE address – a unique 64-bit identifier used for system configuration

World Wide Name (WWN) – derived from the IEEE address; the FC industry

uses the WWN for FC connectivity.
Serial number – assigned by Emulex and used when communicating with

Emulex
Note: The adapter has two IEEE addresses and two WWNs, one for each port.
PCNA EP OCe14102 2x 10Gb
Adapter Identification
Page 7