JVC KM-H3000 User Manual page 57

Name
Write Transition Mode
Read Mle Autotrans Rate
Read Keyer Mix Rate
Read Fade To Black Rate
Write Mle Autotrans Rate
Write Keyer Mix Rate
Write Fade To Black Rate
Read Key Settings
Write Key Settings
Learn Into Mem
Recall From Mem
Read Software Version
Read Field Mode
Write Field Mode
All Stop
Read Lamp Status
Write Lamp Status
Write Button Press
Send Mem To Editor
Load Mem From Editor
**
Data byte 1:
Bit 7: 0=select elements, 1=select elements and
perform transition
Data byte 2:
Bit 6-7: Ignored
Data byte 3:
Bit 4-7: Ignored
Name
Key Clip
Key Gain
Vert. Position
Horz. Position
Key Matte Fill Hue
Pattern Size
Table 2 GVG100 Supported Commands
MLE/Keyer Length
MLE 3
MLE 2
Keyer 2
MLE* 2
MLE 5
Keyer 5
—* 5
Keyer 2
Keyer 62(?)
— 3
— 3
— 2
— 2
— 2
— 3
— 3
— 3
Both 3
— 3
— 73
Bit 4-6: 4=select key 1, 5=select key 2, 6=select
bkgd
Bit 4-5: 4=select key 3, 5=select key 4
Bit 0-3: binary coded decimal (valid range is
b0-b1001, or 0-9)
Table 3 GVG100 Supported Analog Controls
MLE/Keyer Byte Code
Keyer
Keyer
MLE
MLE
MLE
MLE
Byte Code
CA <mode>
4C
4D
7D —
CC
CD
FD **
53 Not yet implemented
D3 Not yet implemented
DA <mem#>
DB <mem#>
6C
6D —
ED 0 or 1
F2 D0*
78 0
F8 —
FB <button>
7E Not yet implemented
FE Not yet implemented
Bit 0-3: binary coded decimal (valid range is
b0-b1001, or 0-9)
Bit 0-3: binary coded decimal (valid range is
b0-b1001, or 0-9)
0x0A
0x0B
0x11
0x12
0x14 Key mattes not supported
0x15
Data/Notes
Last 5 bits used; bit 0: key
1, 1: key 2, 3: bkgd, 4:
key 3, 5: key 4
—
—
*Currently MLE-specific
**
**
*Currently not supported.
Fade to black = transition
rate.
Supports memories 0-9
Supports memories 0-9
—
Field Mark only
Field Mark only
*Data byte is unused
Included for GVG100
spec completeness only.
Notes
53