Speaker Disassembly; Figure 6-11. Lcd And Keypad Removal - Motorola CP185 Basic Service Manual

Maintenance – CP185: Disassembling and Reassembling the Radio – General
4. Remove the LCD (34), Poron Pad (40) and Keypad (39) from the Front Housing.
(Refer Figure 6-11).
Note: The poron pad will be damaged during disassembly. A new poron pad is needed for
reassembly.

6.4.1.4 Speaker Disassembly

1. Remove the screw holding the Speaker Retainer (8) to the Front Housing with a Phillips
screwdriver.
2. Remove the Speaker Retainer from the Housing.
Note: Be careful not to damage the Speaker Wire when removing the Retainer Bracket.
3. Remove the Speaker from the Housing with a flat head screwdriver.
4. Remove the Speaker Insulator (9) from the speaker.

Figure 6-11. LCD and Keypad Removal

LCD
Keypad
Poron Pad
6-9