Switching Between Picture Sources - Epson PowerLite 1720 Installation Handbook

Epson PowerLite 1720 / 1730W
Controlling the Picture and Sound
You can use the remote control to preview and select your picture
sources, temporarily turn off the picture and sound, freeze the action,
zoom in on the picture, and adjust the volume.

Switching Between Picture Sources

If your projector is connected to more than one computer and/or
video source, you can switch between the different sources:
The easiest way to select your source is to press the
on the remote control (or the
projector) repeatedly until you see the image you want on the
screen.
On the remote control, there are four
to switch between equipment connected to the port identified on
each button (The
PowerLite 1720/1730W.)
After you select a source, the screen goes dark for a moment before the
image appears.
Source Search
button does not work with the
EasyMP
INSTALLATION HANDBOOK
Search
button on the
buttons. Use them
Source
Remote Control Information
button
2