Compatible Receivers For Ip Communication - Bosch B5512 Reference Manual

50 en | IP communications
Flash pattern
Table 8.8: Heartbeat LED descriptions
Flash pattern
RX (Receive)
TX (Transmit)
Table 8.9: RX and TX LED descriptions
Refer to the module's Installation and Operation Guide for more information on the LEDs and
troubleshooting.
8.5

Compatible receivers for IP communication

When the control panel is configured to report in Modem4 format the Conettix central station
receiver/gateway and the D6200 Programming/Administration Software may require an
update. Requirements are shown in the Modem4 requirements table below.
Receiver/Gateway
Conettix D6600 Communications Receiver/Gateway
(with D6641 line cards installed only)
Conettix D6100IPv6 Communications Receiver/Gateway 01.10.00
Conettix D6100i Communications Receiver/Gateway
When the control panel is configured to report in the Contact ID reporting format the Conettix
central station receiver/gateway and the D6200 Programming/Administration Software may
require an update as shown in the Contact ID requirements table below.
ContactID reporting format requirements
Receiver/Gateway
Conettix D6600 Communications Receiver/Gateway
(with D6641 line cards installed only)
Conettix D6100IPv6 Communications Receiver/Gateway 61.10.00
Conettix D6100i Communications Receiver/Gateway
2015.07 | 12 | F.01U.287.180
On Steady
Off
Installation and System Reference Guide
Function
Trouble state. Indicates a trouble condition
exists. Examine the other LEDs to determine
the trouble condition.
LED trouble state. Indicates the module is
not powered up, or there is a failure in the
module. Check for proper installation.
Function
Occurs every time a packet is received on-air.
Flashing
Occurs every time a packet is transmitted on-
air.
Flashing
CPU version D6200 version
01.10.00 2.10
2.10
01.10.00 2.10
CPU version D6200 version
01.03.02 1.35
2.10
61.04.00 1.35
Bosch Security Systems, Inc.
Control Panel