Acer Aspire T130 Service Manual page 30

Parameter
IDE Channel 1 Slave
Drive A
Video
Halt On
Base Memory
Extended Memory
Total Memory
23
Description
Lets you configure the hard disk
drive connected to the slave port
of IDE channel 1.
To enter the IDE Channel 1 Slave
setup, press e.
The IDE CD-ROM is always
automatically detected.
Allows you to configure your
floppy drive A.
This item specifies the type of
video card in use. The default
setting is VGA/EGA. Since current
PCs use VGA only, this function is
almost useless and may be
disregarded in the future.
This parameter enables you to
control the system stops in case of
Power On Self Test errors
(POST).
Refers to the portion of memory
that is available to standard DOS
programs. DOS systems have an
address space of 1 MB, but the
top 384 KB (called high memory)
is reserved for system use. This
leaves 640 KB of conventional
memory. Everything above 1 MB
is either extended or expanded
memory.
Memory above and beyond the
standard 1 MB (megabyte) of base
memory that DOS supports.
Extended memory is not
configured in any special manner
and is therefore unavailable to
most DOS programs. However,
MS Windows and OS/2 can use
extended memory.
Total base, and extended memory,
and I/O ROM 384KB available to
the system.
Option
(Show the Status:)
None
HDD or CD-ROM Number
None
360K, 5.25in
1.2M , 5.25 in.
720K , 3.5 in.
1.44M, 3.5 in.
2.88M, 3.5 in.
EGA/VGA
CGA 40
CGA 80
MONO
All Errors
No Errors
All ,But keyboard
All ,But Diskette
All ,but Disk/Key
N/A
N/A
N/A
Chapter 2