NEC Express5800/320Fd-MR N8800-123F, EXP320K User Manual page 126

4-20 System Configuration
Server
Move the cursor onto [Server] to display the Server menu.
The following describes options you can configure in the Server menu and their functions.
Select an option with the "►" mark and press Enter to display its submenu.
Refer to the table below for information on options.
Main Advanced
System Management
Console Redirection
Event Log Configuration
Monitoring Configuration
Post Error Pause:
AC-LINK:
Power On Delay Time:
F1 Help ↑↓ Select Item
Esc Exit ←→ Select Menu
Option
Post Error Disabled
Pause
[Enabled]
AC LINK Stay Off
[Last State]
Power On
Power ON [180]-255(s)
Delay Time
ftServer Setup
Security
[Enabled]
[Last State]
[180]
-/+
Enter Select
Parameter
Set whether or not to pause POST at the end
of POST if an error has occurred during
POST execution.
Specify the AC LINK feature by selecting the
status of the power supply unit of the server
when the AC power supply restarts. (See the
following table for details.)
Configure the DC ON delay time if AC LINK
is set to "Power On" or "Last State" (unit:
second).
Server Boot
Additional setup
menu to view
server management
features.
Change Values
Sub Menu
Description
[
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
]: factory default