NEC Express5800/320Fd-MR N8800-123F, EXP320K User Manual page 473
Express5800 series
Hide thumbs
Also See for Express5800/320Fd-MR N8800-123F, EXP320K:
- User manual (504 pages) ,
- User manual (126 pages) ,
- User manual (116 pages)
Table of Contents
Advertisement
1.
Mount N8803-032 SCSI board and start Windows Server 2003. When this launches, [New
Hardware Detected] window appear and the driver will be installed automatically. However,
the standard driver for the OS is not applicable on the ft server. Therefore, update the driver
with the following procedure.
2.
Insert the "NEC EXPRESSBUILDER" DVD into the DVD-ROM drive and run the
following command after starting the command prompt.
Run either of the below command depending on the OS:
<32bit> Optical disc drive: \001\win\has\w2k3\HASSETUP\LAN\INSTALL.VBS
<64bit> Optical disc drive: \001\win\has\w2k3amd64\HASSETUP\LAN\INSTALL.VBS
3.
Confirm the driver's version.
From [Device Manager], select [SCSI and RAID Controller]. Right-click [Adaptec SCSI
Card 29320ALP-Ultra320 SCSI] and display the property. Click [Driver] tag and confirm
whether the driver version is 7.0.0.7. (see below).
System Upgrade 8-39
Advertisement
Table of Contents
Troubleshooting
