NEC Express5800/320Fd-MR N8800-123F, EXP320K User Manual page 129

Console Redirection
Select "Console Redirection" on the Server menu and press Enter to display the following screen.
Main Advanced
Console Redirection
Com Port Address
Baud Rate
Console Type
Flow Control
Console connection:
Continue C.R. after POST: [Off]
F1 Help ↑↓ Select Item
Esc Exit ←→ Select Menu
See the table below for setup options on the screen.
Option
Com Port Address
Baud Rate*
Console Type*
Flow Control*
Console Connection
Continue C.R. after
POST
ftServer Setup
Security Server
[Disabled]
[19.2K]
[PC ANSI]
[CTS/RTS]
[Direct]
-/+
Enter Select
Parameter
[Disabled]
Serial Port1
Serial Port2
9600
[19.2K]
38.4K
57.6K
115.2K
VT100
VT100, 8bit
PC-ANSI, 7bit
[PC-ANSI]
VT100+
VT-UTF8
None
XON/XOFF
[CTS/RTS]
[Direct]
Via modem
[Off]
On
Boot
Item Specific Help
If enabled, it will
use a port on the
motherboard.
Change Values
Sub Menu
Description
Select a serial port.
Select a port rate used for the interface with a
hardware console to be connected.
Select a console type.
Select a flow control method.
Select a connector.
Specify whether or not to continue Console
Redirection after OS is loaded.
System Configuration 4-23
Exit
F9 Setup Defaults
F10 Save and Exit
[ ]: factory default