Making/Answering Calls Using The Base Unit; Making Cellular Calls; Making Landline Calls - Panasonic KX-TG9581 Operating Instructions Manual

Making cellular calls

Important:
R Only 1 cellular line can be used at a time.
R Before making calls, confirm that the
corresponding CELL indicator lights up
(page 16).
1
Dial the phone number.
R To correct a digit, press MCLEARN.
2
Press the desired cellular line key (MCELL 1N
to MCELL 4N).
3
Lift the corded handset.
4
When you finish talking, place the corded
handset on the cradle.
Note:
R While on a call, you can switch from the base
unit to the cordless handset as follows.
The call sharing mode must be on (page 29).
A Handset: MCELLN
desired cellular phone. a MSELECTN
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular calls
(page 21).
B Base unit: Place the corded handset on the
cradle. When the speakerphone is used, press
M N.
R During a conversation with the corded handset,
you can switch to the speakerphone by pressing
M N, then place the corded handset on the
cradle.
Adjusting the receiver or speaker volume
Press MDN or MCN repeatedly while talking.
Making a cellular call using the redial list
The last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
MREDIALN
2
MbN: Select the desired phone number.
3
Press the desired cellular line key (MCELL 1N
to MCELL 4N), then lift the corded handset.
Erasing a number in the redial list
1
MREDIALN
2
MbN: Select the desired phone number. a
MERASEN
3
MbN: "Yes" a MSELECTN
For assistance, please visit http://www.panasonic.com/help
TG958x_0704_ver031.pdf 27

Making/Answering Calls Using the Base Unit

*1
a MbN: Select the
4
MEXITN

Making landline calls

1
Dial the phone number.
R To correct a digit, press MCLEARN.
2
Lift the corded handset.
R An available line is automatically selected
and either the LINE 1 indicator or LINE 2
indicator lights up. To change the line
selection mode, see page 18.
R You can also select the line manually by
pressing MLINE 1N or MLINE 2N before lifting
the corded handset.
3
When you finish talking, place the corded
handset on the cradle.
Note:
R You can also dial the phone number after lifting
the corded handset.
R While on a call, you can switch from the base
unit to the cordless handset as follows.
The call sharing mode must be on (page 29).
A Handset: Press the corresponding line key
(ML1N or ML2N).
B Base unit: Place the corded handset on the
cradle. When the speakerphone is used, press
M N.
Using the speakerphone
1
During a conversation with the corded
handset, press M N to turn on the
speakerphone.
R You can place the corded handset on the
cradle.
R Speak into the base unit microphone.
R Speak alternately with the other party.
2
When you finish talking, press M N.
Note:
R To switch to the receiver, lift the corded handset.
Making a call using the redial list
The last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
MREDIALN
2
MbN: Select the desired phone number.
3
Lift the corded handset.
2014/07/04
27
10:32:26