Automatic Dispenser - Electrolux 6000 series Service Manual

Automatic Dispenser:

The automatic dispenser for detergent, liquid bleach and
fabric softener system is made up of the dispenser cavity,
and a removable drawer with three cavities: one for
detergent, one for bleach and one for fabric softener.
A plastic conveyer is snapped to the bottom of the drawer
to direct the outputs from the bleach and softener
chambers to the dispenser housing outlet channel. This
prevents the mixtures from coming out the front of the
drawer.
The 2 outlets of the water inlet valve assembly are inserted
into the rear of the automatic dispenser. During the fill
cycles, water is directed into the top of the cavity through
2 inlets. The inlet on the right, as viewed from the front
of the washer, is connected to the combination output of
the hot water solenoid and the center cold water solenoid.
The inlet on the left, as viewed from the front of the
washer, is connected to the cold water solenoid.
In the fill cycle, water enters into the top of cavity and is
directed across the top of the cavity by 4 channels: the
dispenser bypass channel, the detergent channel, bleach
channel and the fabric softener channel. The channel
that receives the water is determined by which inlet
supplies the water or if both inlets supply the water.
The dispenser advanced rinsing technology channel
receives water whenever the inlet on the right, as viewed
from the front of the washer, is activated.
55