Removing Door Strike; Removing Loading Door; Disassembling The Door - Electrolux 6000 series Service Manual

To remove door strike:
1. Open the loading door and remove the (2) screws
holding the strike to the inner door liner.
To remove loading door:
1. Remove the three screws securing the door hinge
to the front panel.
2. Lift up and out on the door to disengage the hook
on the hinge from the slot in the front panel.

Disassembling the door:

1. Remove the loading door from the washer and place
it on a soft flat surface.
2. Remove the door strike and the (8) screws holding
the inner liner to the outer liner and lift the inner liner
off.
70