Table of Contents
Advertisement
2.4.2
Phoenix BIOS setup
Console Redirection setup
To adjust the Console Redirection settings:
1.
Restart the remote server, then press <Del> during POST to access the BIOS
setup.
2.
Go to the Server menu, select the Console Redirection sub-menu, then press
<Enter>.
3.
Set the following sub-menu items:
• Com Port Address to [On-board COM B] or [On-board COM2 port]
• Baudrate to [57.6K]
• Console Type to [VT-UTF8]
• Flow Control to [CTS/RTS]
• Console connection to [Direct]
• Continue C.R. after POST to [On]*
• # of Pages to Support to [1]
* Set to [On] if you use Console Redirection in DOS mode; set to [Off] if you use
Console Redirection in the console mode of Linux or Windows
Main
Advanced
Com Port Address
Baud Rate
Console Type
Flow Control
Console Redirection
Continue C.R. after POST
# of video pages to support
F1
Help
↑↓
ESC:
Exit
→←
4.
Press <Esc>, then select IPMI Configuration sub-menu from the Server
menu.
5.
Use this sub-menu to adjust the remote server LAN settings or view the
System Event Log (SEL).
6.
When finished, press <F10> to save your changes and exit the BIOS setup.
ASUS ASMB3-SOL PLUS
PhoenixBIOS Setup Utility
Server
Security
Console Redirection
[On-board COM B]
[57.6K]
[VT-UTF8]
[CTS/RTS]
[Direct]
[On]
[1]
Select Item
-/+
Select Menu
Enter
Boot
Exit
If enabled, it will use a
port on the motherboard.
Change Values
Select Sub-menu
OS.
®
Item Specific Help
F9
Setup Defaults
F10
Save and Exit
2-13
Advertisement
Table of Contents
