Table of Contents
Advertisement
You must configure the network settings of both the remote server and the local/
central server to establish communication for remote server control and monitoring.
Prepare the support CD and a bootable floppy disk to configure the network
settings.
Running the BIOS IPMI configuration
To configure the IPMI in the BIOS:
1.
Restart the remote server, then press <Del> during POST to enter the BIOS
setup.
2.
Go to the Server menu, then select the IPMI Configuration sub-menu. Use
this sub-menu to configure the IPMI settings.
3.
When finished, press <F10> to save your changes and exit the BIOS setup.
Server Features
Remote Access Configuration
IPMI Configuration
IPMI Configuration
IPMI Configuration
BMC Firmware version:
Boot Option Uses
OS Boot Timeout
Timeout Value
Clear System Event Log
BMC Time Sync.
System Event Log
LAN Setting
2-10
Server
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
Server
1.00-1.00
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
BIOS SETUP UTILITY
[System]
[Disabled]
[
0]
[Disabled]
[Enabled]
Select Screen
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
System: Boot Option
is controlled by
BIOS.
BMC: Boot Option is
controlled by BMC.
Select Screen
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
Chapter 2: Installation
Advertisement
Table of Contents
