Care And Cleaning - Kenwood DF520 Series User Manual

operating the timer
1 Press the button once, the display will flash "00".
2 Press again to set the countdown time in 1 minute
intervals. Hold the button in until the required set time is
reached ie "05" = 5 minutes. Then release the button.
Note: The timer will only display seconds when the
countdown time is below 1 minute.
3 The display will flash for 5 seconds - during this period
the set time can be increased by holding the button in
again. After 5 seconds the display will stop flashing and
the countdown will begin.
4 To change the countdown time during operation, press
and hold the button in for 3 seconds. The display will
reset to "00" and a new time can be set.
5 When the countdown has finished the timer will "beep"
for 15 seconds. To stop the timer beeping, press the
button once.
6 The display will automatically turn off after 45 seconds
if not in use.

care and cleaning

Never start cleaning until the oil has cooled
G
down.
Always unplug and remove the electrics unit before
G
cleaning.
Ensure everything's completely dry before
G
reassembling.
electrics unit
Never put it in water.
G
Before removing the electrics unit check that the cord
G
is released from the cord storage area at the back of
the fryer .
Pull out. Wipe with a damp cloth and dry thoroughly.
G
lid
Remove and soak in hot soapy water for 20 minutes.
G
basket
After each use, remove and soak in hot soapy water for
G
20 minutes. Then use a stiff brush.
fryer body and bowl
Soak in hot soapy water for 20 minutes. Then use a
G
non-abrasive cleaner.
If you have a dishwasher everything - except the
G
electrics unit - is dishwasher safe. Your dishwasher
may darken the inside of the lid but it will still work
perfectly. For baked on oil, we recommend soaking the
bowl prior to dishwashing.
replacing the timer battery
1 Turn the battery cover anti-clockwise and remove the
battery .
2 Replace the battery - type L1154 or equivalent from
your local electrical retailer or chemist.
3 Fit the new battery ensuring it is the correct way round
and replace the cover.
service and customer care
If the cord is damaged it must, for safety reasons, be
G
replaced by Kenwood or an authorised Kenwood
repairer.
If you experience any problems with the
G
operation of the fryer, before calling for
assistance refer to the troubleshooting guide.
If you need help with:
using your fryer or
G
servicing or repairs
G
Contact the shop where you bought your fryer.
Designed and engineered by Kenwood in the UK.
G
Made in China.
G
IMPORTANT INFORMATION FOR CORRECT
DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be
disposed of as urban waste.
It must be taken to a special local authority differentiated
waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids
possible negative consequences for the environment and
health deriving from inappropriate disposal and enables
the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder
of the need to dispose of household appliances
separately, the product is marked with a crossed-out
wheeled dustbin.
4