Sharp UP-3300 Programming Manual page 20

[JOB#923] : MRS=0010 : INLINE PROGRAMMING
AREA
923-A,B: 1. The record number for REQUEST of T-LOG POLLING
(x100)
1. The record number for REQUEST of T-LOG
POLLING (x100)
0000 ∼ 9900
Explanation for satellite:
Ex: When AB=10 The satellite will request to the master to poll the
T-log when the T-log records exceed 1,000.
923-C: 1. T-log Function
1. T-log Function
No
Yes
923-D: 1. Polling cycle (second)
1. Polling cycle (second)
0 ∼ 9 Sec.
[JOB#924] : MRS=1433 : INLINE PROGRAMMING
AREA
924-A,B,C: Not used (Fixed at "143")
924-D: Programming whether or not to lock REG-mode entries
after individual periodic total resetting
1. Locking after Daily Net resetting
2. Locking after Transaction resetting
1. Locking after Daily 2. Locking after
Net resetting Transaction resetting
Yes
No
[JOB#925] : MRS=0303 : INLINE PROGRAMMING
AREA
925-A: Not used (Fixed at "0")
925-B: 1. Various individual resetting
1. Various individual resetting
Disable
Enable
925-C: 1. Report printing when consolidation daily and periodic
transaction reading or resetting is taken
1. Report printing when consolidation daily and
periodic transaction reading or resetting is taken
Printing of both i.e. reports on individual machines
and consolidation report on the entire system
Printing of consolidation report on the entire system
Printing of report on individual register
925-D: 1. Resetting is allowed when the server is remained sign on
2. Resetting in the open store state
1. Resetting is allowed when
the server is remained sign on
No
Yes
923-AB
00-99
923-C
0
1
923-D
0 ∼ 9
924-A
Yes 0
No 1
Yes 2
No 3
925-B
2
3
925-C
0
1
2
2. Resetting in
the open 925-D
store state
Disable 0
Enable 1
Disable 2
Enable 3
[JOB#926] : MRS=0000
926-A: 1. Printing "LAST VOID DATA" on KP.
2. Printing "PAST VOID DATA" on KP.
1. Printing "LAST VOID
DATA" on KP.
Both are printed
Both LAST VOID DATA
and voided item aren't
printed
926-B: 1. Sending "REFUND DATA" on KP.
2. Server Sign-on/off sign on/off of CAT terminal.(for CAT1
setting).
1. Sending "REFUND
DATA" on KP.
Yes
No
926-C: 1. Open store / Close store : standalone POS with on-line
2. Send AT command string with OPEN STORE
3. Send AT command string with CLOSE STORE
1. Open store / 2. Send AT
Close store :
standalone
POS with on-line
No
Yes
926-D: Not used (Fixed at "0")
[JOB#927] : NOT USED MRS=0000
[JOB#928] : MRS=0060
928-A,B: Not used (Fixed at "00")
928-C: 1. Printing of PLU on bill when it is 0
2. Printing of text for associated PLU in COMBO MEAL on
bill.
1. Printing of PLU 2. Printing of text for
on bill when it is 0
Yes
No
– 19 –
2. Printing "PAST VOID
926-A
DATA" on KP.
Both are printed
Both PAST VOID DATA
and voided item aren't
printed
Both are printed
Both PAST VOID DATA
and voided item aren't
printed
2. Server Sign-on/off
sign on/off of CAT
926-B
terminal.(for CAT1
setting).
No
Yes
No
Yes
3. Send AT
command command
string at string at 926-C
CLOSE OPEN
STORE STORE
No
No
Yes
No
Yes
Yes
No
No
Yes
No
Yes
Yes
associated PLU in 928-C
COMBO MEAL on bill.
Yes
No
Yes
No
0
1
2
3
0
1
2
3
0
1
2
3
4
5
6
7
0
2
4
6