Brother HL-L9200CDWT User Manual page 107

General Information
Level 1 Level 2
Network Wired LAN
The factory settings are shown in Bold with an asterisk.
Level 3 Level 4
TCP/IP Boot Method
IP Address
Subnet Mask
Gateway
IP Boot
Tries
APIPA
IPv6
-
Ethernet
Wired Status -
-
MAC Address
Restores wired network settings of the internal print server to the
Set to
factory settings.
Default
Wired Enable -
Options
Auto* / Static / RARP /
BOOTP / DHCP
###.###.###.###
1
(000.000.000.000)*
###.###.###.###
1
(000.000.000.000)*
###.###.###.###
1
(000.000.000.000)*
0 / 1 / 2 / 3* / ... / 32767
On* / Off
On / Off*
Auto* / 100B-FD /
100B-HD / 10B-FD /
10B-HD
Active 100B-FD /
Active 100B-HD /
Active 10B-FD /
Active 10B-HD /
Inactive / Wired OFF
-
On* / Off
Descriptions
Chooses the IP
method that best
suits your needs.
Enter the IP
address.
3
Enter the Subnet
mask.
Enter the Gateway
address.
Specifies the
number of
attempts the
machine will try to
obtain an IP
address when the
Boot Method is
set to any setting
except Static.
Automatically
allocates the IP
address from the
-
link local address
1
range.
Enables or
disables the IPv6
protocol.
Chooses Ethernet
link mode.
Displays Ethernet
link status.
Displays MAC
address of the
machine.
Chooses Ethernet
link mode.
98