Brother HL-L9200CDWT User Manual page 187

Troubleshooting
Error message
Log Access Error
No Belt Unit
No Drum Unit
No HUB Support
No Paper
No Permission
No Toner
No Tray
No Waste Toner
Not Registerd
Out of Memory
Print Data Full
Print Unable ##
Cause
The machine could not access the
print log file in the server.
The belt unit is not installed
correctly.
The drum unit is not installed
correctly.
A USB hub device is connected to
the USB direct interface.
The machine is out of paper or
paper is not correctly loaded in the
specified paper tray.
Printing colour documents is
restricted.
The toner cartridge for the colour
indicated on the Touchscreen is not
installed correctly.
The paper tray that is indicated on
the Touchscreen is not installed or
not installed correctly.
The waste toner box is not installed
correctly.
The requested operation is not
permitted to all User IDs by Secure
Function Lock.
The machine's memory is full.
The machine's memory is full.
The machine has a mechanical
problem.
Action
Contact your administrator to check the Store Print
Log to Network settings.
(For detailed information, see the Network User's
Guide)
Reinstall the belt unit (see the steps in Replacing the
belt unit on page 140).
Reinstall the drum unit. (See Replacing the drum unit
on page 133.)
Disconnect the USB hub device from the USB direct
interface.
Load paper in the indicated paper tray.
Make sure the paper guides are set to the correct
size.
Contact your administrator to check your Secure
Function Lock settings.
Remove the drum unit, remove the toner cartridge for
the colour indicated on the Touchscreen from the
drum unit, and put the toner cartridge back into the
drum unit. Reinstall the drum unit in the machine. If
the problem continues, replace the toner cartridge
(see Replacing the toner cartridges on page 128).
Reinstall the paper tray that is indicated on the
Touchscreen.
Reinstall the Waste Toner Box (see the steps
in Replacing the waste toner box on page 146).
Contact your administrator to check your Secure
Function Lock settings.
Reduce the complexity of your document or reduce
the print resolution.
Add more memory. (see Installing extra memory
on page 121.)
Press and delete the previously stored secure
print jobs.
Add more memory. (see Installing extra memory
on page 121.)
Press and hold down
Wait a few seconds, then turn it on again.
If the problem continues, contact Brother customer
service or your local Brother dealer.
to turn the machine off.
178
6