Tape Remaining - Sharp DV-NC55U Operation Manual

Tape Remaining

With this feature, you can display the remaining amount of tape on
the TV screen, during Recording or Playback a tape.
1
Insert a cassette.
2
Press ON SCREEN until the tape is running. The tape remaining
counter will display on the TV screen after few seconds as
shown on right.
The tape remaining computation will not be performed, if no tape
is inserted to the Unit.
• If a cassette with erasure protection tab removed is inserted, the tape
remaining will display automatically after few seconds.
• During computation, Æ Æ Æ Æ Æ REC will not function.
• During recording, if only 5 minutes of tape remain, Tape Remaining will
flash.
• When
S
C
and
adapter, the indication may not be correct.
• This function may not work properly for video cassettes other than
T-30, T-60, T-90 and T-120 or video cassettes other than standard
cassettes.
• The tape remaining does not operate when EJECT is pressed.
• During Fast Forward (FF) or Rewind (REW), the tape remaining
calculation display may be different.
• The indicated length of tape remaining is only an approximate guide.
C cassettes are used with a cassette
TIMER
POWER
TV/VCR EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
FUNCTION OPEN/
PROGRAM ZOOM
CONTROL CLOSE
TITLE
DVD MENU
CANCEL SET
RETURN ENTER
ZERO BACK
SKIP SEARCH
REPLAY
AM/PM INPUT VCR DVD
100
REV FWD
PLAY
REC
PAUSE/STILL
STOP
DPSS
TAPE
SKIP SLOW
SPEED
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
EJECT
ON SCREEN
REC
71