Dell 2130cn User Manual page 110
Color laser printer
Hide thumbs
Also See for 2130cn:
- Service manual (900 pages) ,
- Release notes (8 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
8. Close the belt unit by pushing it up.
9. Close the front cover.
10. Insert the standard 250-sheet tray into the printer, and push until it stops.
CAUTION:
Do not use excessive force on the tray. Doing so could damage the tray or the inside of the printer.
Cleaning the CTD Sensor Inside the Printer
Clean the CTD sensor only when an alert for the CTD sensor is shown on the Status Monitor or operator panel.
NOTICE:
To protect the drums of the Print Head Device (PHD) against bright light, close the belt unit within three minutes. If the belt unit remains open
for more than three minutes, print quality may deteriorate.
NOTICE:
Ensure that nothing touches or scratches the surface (black-colored film) of the belt unit. Scratches, dirt, or oil from your hands on the film of
the belt unit may affect print quality.
1. Ensure that the printer is turned off.
2. Pull the standard 250-sheet tray out of the printer carefully. Hold the tray with both hands, and remove it from the printer.
Downloaded from ManualsPrinter.com Manuals
Advertisement
Table of Contents
Troubleshooting
