Chart Print; Machine Check; Paper Wrinkle Check Mode - Dell 2130cn User Manual

The Diagnosis tab includes the Chart Print, Machine Check, Paper Wrinkle Check Mode, Environment Sensor Info, Developer Stir Mode, and Refresh
Mode pages.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.

Chart Print

Purpose:
To print various charts that can be used for the printer's diagnosis.
Values:
Pitch Configuration Chart
Ghost Configuration Chart
4 Colors Configuration
Chart
MQ Chart
Alignment Chart
PHD Refresh
Configuration Chart

Machine Check

Purpose:
To check the operation of the printer's components.
Values:
Main Motor Operation Check* Click Start to operate the main motor inside the printer. Confirm the motor sound.
Fuser Motor Operation Check
Feed Roll Operation Check*1
REGI CLUTCH Operation
Check
Machine
Dispense Motor Check
Check
(Yellow)
Dispense Motor Check
(Magenta)
Dispense Motor Check (Cyan)
Dispense Motor Check
(Black)
Play of Sound
Start
1
* When performing the feed roll operation check, remove the standard 250-sheet tray from the printer.

Paper Wrinkle Check Mode

Purpose:
To determine whether or not paper is wrinkled in the fuser.
This function stops printing before the paper enters the fuser. After you remove the paper inside the printer, check the following:
If the paper is wrinkled, the wrinkle occurred in the part other than fuser.
l
If the paper is not wrinkled, the wrinkle occurred in the fuser.
l
Values:
A4 (210 x 297 mm)
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Letter (8.5 x 11")
Downloaded from ManualsPrinter.com Manuals
Outputs full halftone pages for yellow, magenta, cyan, and black. Also outputs pages to check the pitch. A total of five pages
are output. The chart is output to A4 or Letter size paper.
Outputs a chart to check for ghost printing. One page is output. The chart is output to A4 or Letter size paper.
Bands of yellow, magenta, cyan, and black are output with varying density. One page is output. The chart is output to A4 or
Letter size paper.
Outputs charts to check for the binding in A4 or Letter.
Outputs a chart to check for proper alignment of the print image on the paper. One page is output. The chart is output to A4 or
Letter size paper.
Outputs a chart to check the light fatigue of the PHD unit. One page is output. The chart is output to A4 or Letter size paper.
Click Start to operate the fuser motor. Confirm the motor sound.
Click Start to operate the feed roll. Confirm the motor sound.
Click Start to operate the REGI CLUTCH. Confirm that you can hear the clutch clicking.
Click Start to operate the dispense motor for each toner cartridge. Confirm the motor sound.
Plays back through your computer's speakers a recording of the normal sound for the currently selected
Machine Check item.
Click this button to check the operation of the items selected with Machine Check and output the results to
Result.