NEC DS1000 Product Description page 114

Section 3: Features
104 N Section 3: Features
Option
Transfer Recall
Intercom Inter-digit
Meet-Me Conference
Dialing Pause
Page Duration
Door Unlock
DIL No Answer
Trunk Revert
Trunk Delay Ring
Trunk Overflow
Centrex Type Feature
Key Delay
ACD/UCD Overflow
Number of Password
Attempts
Program Lockout Time
Description
Use this timer to set how long a transferred call rings an idle des-
tination extension or Ring Group before recalling the extension
from which it was initially transferred.
In addition, use this timer to set how long a transferred call rings
a busy operator extension before recalling the extension from
which it was initially transferred.
When an extension user places a call, they must dial each suc-
ceeding digit within this interval.
When a user initiates a Meet-Me Conference, the system waits
this interval for the Paged party to join the call.
For Speed Dial, the system waits this interval when it encounters
a pause in a Speed Dial bin.
Use this timer to set the maximum length of Page announcements.
(DS1000 only) When a single line (2500 type) user hookflashes
while talking to a visitor at a Door Box, the Door Box strike
opens for this interval.
This timer sets how long a DIL to an extension rings before Key
Ring or overflow occurs. Key Ring rings all extensions pro-
grammed to ring for that line.
This timer sets how long Hold Recall rings the extension that
placed the call on hold before Key Ring occurs. Key Ring rings
all extensions programmed to ring for that line.
This timer also sets how long a DIL to a Ring Group master
number rings before Key Ring or overflow occurs. Key Ring
rings all extensions programmed to ring for that line.
In addition, this timer sets how long a Transfer Recall rings the
extension that initially transferred the call before Key Ring occurs.
Use this timer to set how long the system waits before ringing an
extension that has the Delayed Ringing option enabled.
Not used.
This timer sets how long the system waits when it finds a Cen-
trex delay (i.e., D) programmed in a Centrex Feature Key.
This timer sets when UCD overflow occurs. When all UCD
agents are busy, a queued call rings for this interval and then
overflows to the UCD Overflow destination.
Use this option to set how many times the system allows a user
to enter the incorrect programming password before locking
them out.
Not used.
DS1000/2000 Product Description