Line Keys - NEC DS1000 Product Description

Section 3: Features

Line Keys

74 N Section 3: Features
Automatic Hyphenation in the Enhanced Last Number Redial Display
The system will automatically insert hyphens in the Enhanced Last Number Redial display for the
types of calls listed below. All other calls are displayed without hyphens.
G NNX + xxxx calls (e.g., 926-5400)
NPA + NNX + xxxx calls (e.g., 203-926-5400)
G
1 + NPA + NNX + xxxx calls (e.g., 1-203-926-5400)
G
If the call is placed on a PBX trunk, and the PBX access code is dialed, the display shows the PBX
access code, a space, followed by the dialed number using the same hyphenation as shown above
(e.g., 9 1-203-926-5400). If the PBX access code is not dialed, the number is displayed without
hyphens.
Feature Quick Steps
To redial your last call:
1. Lift the handset + (Optional) Press an idle line key to preselect a trunk + Press LND .
To redial your last call using Enhanced Last Number Redial:
1. At a Super Display Telephone
Press LND + Soft key for the number you want to redial.
At a 22- or 34-Button Display Telephone
L
Press LND + VOL
Press a line key for one-
touch access to an outside
line.
Busy Lamp Field (BLF) for the trunk to which it is assigned (see the table below).
When the key is:
On (red)
On (green)
Winking on (red)
Winking on (green)
Flashing slowly (red)
M
or VOL to the number you want to redial + DIAL .
Availability: All versions.
A line key provides an extension user with one-button access to
trunks. The extension user just presses a line key to place or
answer a call on the trunk. There is no need to dial codes to
access or intercept trunk calls. In addition, a line key provides a
Line Key BLF Indications
Off
In use or on Exclusive Hold at a co-
On System Hold at a co-worker's
On System Hold or Exclusive Hold
The trunk is:
Idle or not installed
worker's extension
In use at your extension
extension
at your extension
Ringing into the system
DS1000/2000 Product Description