Call Timer - NEC DS1000 Product Description

Feature Quick Steps
To activate Off Premise Call Forwarding:
1.
2.
3.
To cancel Off Premise Call Forwarding:
1.

Call Timer

G
G
The Call Timer feature also provides:
G
G
G
G
Feature Quick Steps
To time your trunk call if you have an Automatic Call Timer key:
1.
DS1000/2000 Product Description
Press ICM + Dial *3 3 .
To select a Personal Speed Dial bin:
Press Speed Dial Bin ( Bin
To enter a number (which will be stored in bin 720):
Press Number ( Num ) + Follow normal Speed Dial Programming
Dial 2 to forward all calls or
Press ICM + Dial *3 0 .
Call Timer helps users that
must keep track of their time
on the phone.
Manual Call Timer
Any time while placing a call or while on a call, a display keyset user can press their Manual
Call Timer key to start the Call Timer. The Call Timer will continue until the user hangs up or
presses their Manual Call Timer key again.
Automatic Call Timer
In addition to the features of the Manual Call Timer key, the Automatic Call Timer key pro-
vides automatic timing for trunk calls. When a display keyset with an Automatic Call Timer
key places or answers a trunk call, the Call Timer automatically starts when that trunk call
connects. The Automatic Call Timer does not automatically start for Intercom calls. The Auto-
matic Call Timer can also work like a Manual Call Timer key. There is no need to have a Man-
ual and Automatic Call Timer key on the same phone.
Review of Previously Timed Call
Any time after hanging up from a timed call, a display keyset user can press their Manual or
Automatic Call Timer key to review the duration of that call.
Timer Reset for Current Call
While the display keyset user is timing their call, they can press CLEAR at any time to reset
the Call Timer to 00:00:00.
Automatic Timer Stop
The system assigns the Call Timer to the active call. When the user terminates the active call,
the Call Timer automatically shuts down.
Wrap-up Timer Display
After hanging up a timed call, a display keyset will show the Call Timer data for 6 seconds
before returning the display to idle. This gives the extension user adequate time to make a
record of the timed call, if desired.
Place or answer trunk call. The Call Timer starts automatically.
Section 3: Features
) + Dial bin number (701-720) +
8 to forward just trunk calls.
Availability: All versions.
Call Timer lets a keyset user with a Call Timer key time their
trunk calls on the telephone display. There are two types of Call
Timer keys:
HOLD .
Section 3: Features N 37
3