Call Timer; Enhanced Call Timer; Manual Call Timer; Automatic Call Timer - NEC DS1000 Release Notes

Call Timer

Enhanced Call Timer

DS1000 Release Notes
In addition to the capabilities of the Call Timer feature, Enhanced Call Timer provides:
G
Review of Previously Timed Call
Any time after hanging up from a timed call, a display keyset user can press their Manual or
Automatic Call Timer key to review the duration of that call.
G
Timer Reset for Current Call
While the display keyset user is timing their call, they can press CLEAR at any time to reset
the Call Timer to 00:00:00.
G
Automatic Timer Stop
The system assigns the Call Timer to the active call. When the user terminates the active call,
the Call Timer automatically shuts down.
G
Wrap-up Timer Display
After hanging up a timed call, a display keyset will show the Call Timer data for 6 seconds
before returning the display to idle. This gives the extension user adequate time to make a
record of the timed call, if desired.

Manual Call Timer

Any time while placing a call or while on a call, a display keyset user can press their Manual Call
Timer key to start the Call Timer. The Call Timer will continue until the user hangs up or presses
their Manual Call Timer key again.
Unlike previous software versions, the Manual Call Timer key no longer works like a stopwatch
while the phone is idle.

Automatic Call Timer

In addition to the features of the Manual Call Timer key, the Automatic Call Timer key provides
automatic timing for trunk calls. When a display keyset with an Automatic Call Timer key places or
answers a trunk call, the Call Timer automatically starts when that trunk call connects.
The Automatic Call Timer does not automatically start for Intercom calls.

Operation

To time your trunk call if you have an Automatic Call Timer key:
G
Place or answer trunk call.
The Call Timer starts automatically. The Automatic Call Timer key lights red while the
system times the call.
To manually time your Intercom or trunk call:
G
While placing or while on the call, press the Manual or Automatic Call Timer key.
the Call Timer key lights red while the system times the call.
To stop the Call Timer:
G
Hang up.
The timer automatically stops after 6 seconds.
OR
G
Press the Manual or Automatic Call Timer key.
To restart the timer, press CLEAR.
DS1000 02.10.09 Release Notes
Enhanced Features in 02.10.09
25 N 02.10.09