Selectable Display Messaging; Soft Key Enhancements; Operation - NEC DS1000 Release Notes

Selectable Display Messaging

Soft Key Enhancements

DS1000 Release Notes
G
Vol Up or Vol Down scrolls through the available entries.
1807-Prime Line Line/Group
If 1807-Prime Line Type is set to Line (2), use this option to assign the trunk or trunk group the
extension seizes when the user lifts the handset. The trunk or group does not have to be on a key
appearing on the phone. Also use this option to set up Prime Line for single line telephones. The
options are:
G
1-48
Line 1-48 (1-6 in DS1000).
G
90-98
Trunk group 0-8 (corresponding to entries 90-98).
The default setting for this option is 90 (trunk group 0).
When entering data, pressing:
G
CLEAR enables Intercom Prime Line.
G
CHECK restores previous entry.
G
Vol Up or Vol Down scrolls through the available entries.
When selecting a Selectable Display Message, display keyset users can dial codes from the dial pad
or use their soft keys.
22-Button and 34-Button Display Telephone Operation
To select a Selectable Display Message:
1. Press ICM and dial *3.
OR
Press PGM + CFWD . You see:
2. Dial 8 or press MORE + MSG . You see:
3. Dial the message number (01-16).
OR
Press Vol Up or Vol Down to scroll through the messages.
4. Press HOLD . The selected message displays.
5. Enter any additional digits.
The total number of digits/characters in the message cannot exceed 20. Use any valid
characters, digits, or symbols (just as if you were entering names).
6. Press HOLD .
It is no longer necessary to press SPK to hang up.
DS1000 02.10.09 Release Notes
Enhanced Features in 02.10.09
45 N 02.10.09