Voice Announce Options Simplified; Last Number Redial; Enhanced Last Number Redial; Redial Display - NEC DS1000 Release Notes

Hide thumbs Also See for DS1000:

Table of Contents

Automatic Hyphenation in the Enhanced Last Number Redial Display

DS1000 Release Notes

Voice Announce Options Simpliﬁed

The Voice Announce options have been simpliﬁed in software version 02.10.09.

Voice Announce Options Prior to Version 02.10.09

Voice Announce Options in Version 02.10.09

In enabled, Enhanced Last Number Redial allows the extension user to select from the last 5 out-

side numbers dialed. When the user places a trunk call, the number dialed is stored in the Enhanced

Last Number Redial buffer. This buffer saves the 5 most recent numbers (including Speed Dial

calls), with the most recent call at the top of the buffer and the oldest number at the bottom of the

buffer. Old calls get pushed off the bottom of the buffer to make room for new calls at the top. If a

user dials a number that is already stored in the buffer, the system inserts the number at the top of

the buffer and deletes the duplicate entry.

The numbers stored in the Enhanced Last Number Redial buffer are retained if the system resets or

is powered down.

Enhanced Last Number Redial is only available at display telephones.

The system will automatically insert hyphens in the Enhanced Last Number Redial display for the

types of calls listed below. All other calls are displayed without hyphens.

NNX + xxxx calls (e.g., 926-5400)

NPA + NNX + xxxx calls (e.g., 203-926-5400)

1 + NPA + NNX + xxxx calls (e.g., 1-203-926-5400)

If the call is placed on a PBX trunk, and the PBX access code is dialed, the display shows the PBX

access code, a space, followed by the dialed number using the same hyphenation as shown above (e.g.,

9 1-203-926-5400). If the PBX access code is not dialed, the number is displayed without hyphens.

DS1000 02.10.09 Release Notes

Enhanced Features in 02.10.09

33 N 02.10.09

Table of Contents