Enhanced Features In 02.10.12; Call Coverage Keys; Guard Timer Implemented; Call Forwarding - NEC DS1000 Release Notes

Hide thumbs Also See for DS1000:

Table of Contents

DS1000 02.10.12 Release Notes

Enhanced Features in 02.10.12

52 N 02.10.12

A 4 second guard timer has been added to Call Coverage key operation. This helps extensions that

have the same Call Coverage key assignments. As soon as an extension user presses their Call Cov-

erage key to answer a call, the key becomes unavailable for 4 seconds to all other extensions with

that same key. (Users will hear reorder tone if they press their key before the 4 seconds expire.)

This helps prevent users from inadvertantly placing a call to the covered destination. In prior soft-

ware versions, for example:

A new call rings the UCD Hunting Group master number, and the Call Coverage keys on both

extensions start to ﬂash (and optionally ring).

Both extension users press their Call Coverage keys to pick up the call.

The system connects the call to the extension user that pressed their key ﬁrst. The other exten-

sion places a call to the UCD Group master number (instead of answering the call).

Call Forwarding cancel allows a keyset user to dial a code to simultaneously cancel all Call For-

warding system-wide. The extension must have access level 4 or 5 (set up in 1801-Access Level).

You should always use Call Forwarding Cancel to initialize Call Forwarding after upgrading

your system from a prior software level.

To cancel all Call Forwarding system-wide:

Do not lift the handset, do not press SPK , and do not press ICM .

Dial # + CC ( 22 ).

At a 22- or 34-Button Display Telephone, you see:

At a Super Display Telephone, you see:

DS1000 Release Notes

Table of Contents