Figure 9-26 System Data 10-12: Cd Cp00 Network Setup; Sip Mlt Quick Startup Guide - NEC SL1100 Networking Manual

NEC SL1100

13.10 SIP MLT Quick Startup Guide

Networking Manual
The following guides describe the setup for a SIP MLT from a default state for
these modes:
Plug and Play

Automatic Registration

Manual Registration

13.10.1 Plug and Play
1. Program 10-12
Assign the VoIPDB registration/signaling IP address, subnet
mask, and default gateway. If no customer provided default
gateway is provided, leave Gateway IP address at 0.0.0.0.

Figure 9-26 System Data 10-12: CD CP00 Network Setup

2. Program 84-26
Assign the IP addresses that the DSP is going to use. The IP
address assigned must be in the same subnet as the address
in Program 10-12-09.
After these commands are uploaded to the CPU, a system
reset must be applied.
Issue 6.0
9 - 59