Section 8 Programming Examples - NEC SL1100 Networking Manual

Issue 6.0
P
S 8
ROGRAMMING
ECTION
The following examples will all be based off of two sites connected together with SL
Net. Site A will have extension numbers in the 1XX range and site B will have
extension numbers in the 2XX range. The diagram below shows the IP Addressing
information for each site.
8.1
Program
10-12-09 172.16.0.10
10-12-10 255.255.0.0
10-12-03 172.16.0.1
84-26-01 172.16.0.11
11-02-01 Default
11-01-01 Digit (2X) set to 3 digit
length
11-01-01 Digit (2X) set to Network
System Access
11-01-01 Digit (2X) set to Network
ID 1
13 - 36
E
XAMPLES
Figure 13-4 Programming Example
Basic SL Net Setup
Site A
10.0.0.10
255.0.0.0
10.0.0.1
10.0.0.11
Change extensions to 201
~ 284
Digit (1X) set to 3 digit
length
Digit (1X) set to Network
System Access
Digit (1X) set to Network ID
1
Site B
IP address of VoIPDB
Subnet Mask of VoIPDB
Default Gateway
DSP IP Address
Extension numbering
Define the digit length for the remote
destination extension numbers.
Set the leading digits of the remote
destination as Network System Access.
Set the leading digits of the remote
destination as the first available network
ID.
NEC SL1100
Notes
SL Net