NEC SL1100 Networking Manual page 238

Issue 6.0
Program
Program Name
Number
15-05-45 NAT Plug&Play
84-26-01 VoIPDB Basic Setup (DSP)– IP
Address
84-26-02 VoIPDB Basic Setup (DSP)– RTP
Port Number
84-26-03 VoIPDB Basic Setup (DSP)– RTP
Port Number (RTP Port Number
+ 1)
11 - 8
Description/Comments
Effective when PRG 10-46-14 is
set to NAT Mode. Select sending
RTP port number to remote router,
use from negotiation result (0) or
received RTP packet (1).
Assign the IP address for the VoIP
Gateway.
Assign the RTP port number to be
used for the DSP on the VoIPDB.
Define the port number for RTCP
to use for each DSP.
NEC SL1100
Assigned Data
1
0 = Off
1 = On
Default = Off
Default = 172.16.0.20

VoIP GW = 10020

VoIP GW = 10021
Level
2 3


NAPT