NEC SL1100 Networking Manual page 217

NEC SL1100
Program
Program Name
Number
ToS Setup – ToS Mode
84-10-01
Program
Program Name
Number
IP System Operation Setup –
RTP Forwarding Mode
10-26-02
IP System Operation Setup –
SIP Peer to Peer Mode
10-26-03
Program
Program Name
Number
11-01-01 System Numbering
Networking Manual
2.2.2 VoIP ToS Setup
Description/
Comments
Use this field to define
your SIP QoS marking
for ToS or Diffserv.
When Input Data is set
to 1, Item No. 07 is
invalid.
When Data is set to 2,
Item No. 02 ~ 06 are
invalid.
2.2.3 SIP Peer to Peer
Description/
Comments
Enable or disable
Peer-to-Peer mode for
SIP phones with
Version 4.0 or higher
software. When PRG
10-33-05 NAT mode is
set to 1 (Enable), P2P
mode for SIP phones
always set to Off
automatically
regardless of this
program setting.
2.2.4 IP Extension Numbering
Description/
Comments
Refer to the SL1100
Programming Manual
for all options and
default settings.
Assigned Data
0 = Disabled (Invalid)
1 = IP Precedence
2 = Diffserv
Default is 0
Assigned Data
0 = No (Disable)
1 = Yes (Enable)
(default is 0)
0 = No (Disable)
1 = Yes (Enable)
(default is 0)
Assigned Data
1 = 3 Digit; Intercom
Default is 3 Digit;
Intercom
Issue 6.0
1 2 3
X
1 2 3
X
X
1 2 3
X
10 - 5